Replacing The Battery - Bosch ManDown Sensor User Manual

ManDown Sensor

6.3. Replacing the battery

Necessary tool for opening the sensor case:
Jeweler's Screwdriver 2.9mm
Turn off the ManDown Sensor. See chapter 4.2. Turning off the sensor.
Unscrew the four screws of the case, as shown in Fig. 3. Bottom view of the ManDown
Sensor.
Carefully remove the compression foam, as well as the used battery.
Replace the new battery; ensure that it is in the correct position.
Carefully place the compression foam as shown in Fig. 4. Opening the ManDown Sensor.
Close the case with the four screws.
Notice!
To avoid deteriorating the inserts, do not force the screwing.
VARTA battery
3V CR1/2AA
User Manual 953.64c
Fig. 3. Bottom view of the ManDown Sensor
Fig. 4. Opening the ManDown Sensor
Bosch Security Systems
The arrows show the screws of
the transmitter case
Compression foam
Page 9