4.5
Setting the PATIENT DATA
Ventilator in STAND-BY operating mode.
Press the encoder knob: the system will activate the SET function.
Turn and select the MENU function.
Turn the knob to select the PATIENT DATA
option.
Falco 202
To exit PATIENT DATA screen.
Press the ESC soft key.
Select CLOSE option and press the encoder.
Wait for the system to return to STAND-BY mode automatically.
Press the knob to confirm your
choice.
The system will display the
MAIN MENU screen, SETUP
parameters.
Press the knob to confirm your
choice.
The system will display the
PATIENT DATA page.
4-9