Group Information Line; Function Group Configuration - Endress+Hauser Proline Promass 83 Function Manual

Device Functions Proline Promass 83 MODBUS RS485
Endress+Hauser
5.4

Group INFORMATION LINE

5.4.1

Function group CONFIGURATION

→
USER INTERFACE C
USER INTERFACE → INFORMATION LINE → CONFIGURATION
ASSIGN 2600
MODBUS register: 2537
Data type: Integer
Access: read/write
CONTROL CAA
MAIN LINE CCA
ADDITIONAL LINE CEA
INFORMATION LINE CGA
Function description
For assigning a value to be displayed to the information line (bottom line in the
local display). This value is displayed during normal operation.
Options: standard
0 = OFF
1 = MASS FLOW
2 = MASS FLOW IN %
3 = VOLUME FLOW
4 = VOLUME FLOW IN %
5 = CORRECTED VOLUME FLOW
6 = CORRECTED VOLUME FLOW IN %
7 = DENSITY
8 = REFERENCE DENSITY
9 = TEMPERATURE
10 = MASS FLOW BARGRAPH IN %
11 = VOLUME FLOW BARGRAPH IN %
12 = CORRECTED VOLUME FLOW BARGRAPH IN %
15 = ACTUAL CURRENT
18 = ACTUAL FREQUENCY
20 = TOTALIZER 1
21 = TOTALIZER 2
22 = TOTALIZER 3
23 = TAG NAME
24 = OPERATING/SYSTEM CONDITIONS
26 = DISPLAY FLOW DIRECTION
Factory setting: OPERATING/SYSTEM CONDITIONS
Advanced selection: with the optional SW package BATCHING
60 = BATCHING KEYS (softkeys on the local display)
!
Note!
• If you select the BATCHING OPERATING KEYS, the multiplex display
functionality is not available in the information line.
• For the functionality and display examples of the Batching menu, see Operating
Instructions BA0107D, "Operation" section.
(continued on next page)
5 Block USER INTERFACE
→
CONFIGURATION 260
47