Service setups
Understand the special software adjustments and related details that may require the attention of a
qualified service technician, whether done periodically or after a specific module replacement.
Required equipment for testing
The equipment required for testing after service is listed below.
•
PC or laptop with 1080p resolution
•
DVD player with Multi-system, equipped "Component", "S-Video", "Composite" and "HDMI".
•
HDTV Source (480P, 720P, 1080P)
•
Quantum Data 802B or CHROMA2327 (Color Video Signal & Pattern Generator)
•
CL200 or CL200A
Service modes
To maintain the DHD410S, entering the service mode.
Entering Service mode
Learn how to enter the Service mode.
1. Turn on the projector.
2. On the Remote or Keypad, press Power, left, right, menu buttons sequentially.
Performing a factory reset
Erase all end-user settings and restore the default on-screen display setting.
1. Enter Service mode.
See
Entering Service mode
2. Select Factory Reset.
DHD410S Service Manual
020-001481-01 Rev. 1 (10-2018)
on page
12.
12