Table of Contents
Advertisement
Goodrive20-EU series VFD
Function
Name
code
Integral speed
P08.43
ratio of keypad
potentiometer
UP/DOWN
P08.44
terminal control
setting
UP terminal
frequency
P08.45
increment
integral speed
ratio
DOWN
terminal
frequency
P08.46
decrement
integral speed
ratio
Action
P08.47
selection at
power loss
Detailed instruction of parameters
2: Valid during running, cleared after receiving
the stop command
LED thousands: ∧/∨ keys and analog
potentiometer integral function
0: The Integral function is valid
1: The Integral function is invalid
0.01 – 10.00s
0x00 – 0x221
LED ones: frequency control selection
0: UP/DOWN terminals setting valid
1: UP/DOWN terminals setting invalid
LED tens: frequency control selection
0: Valid only when P00.06=0 or P00.07=0
1: All frequency modes are valid
2: When the multi-step speed are priority, it is
invalid to multi-step speed
LED hundreds: action selection when stop
0: Setting is valid
1: Valid in running, clear after stop
2: Valid in running, clear after receiving the stop
commands
0.01 – 50.00s
0.01 – 50.00s
0x000 – 0x111
LED ones: Action of the digital regulation
frequency at power off.
81
Function parameters
Default
Modify
value
○
0.10s
○
0x000
○
0.50 s
○
0.50 s
○
0x000
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Goodrive20-EU VFD Series and is the answer not in the manual?
Questions and answers
Start stop time
The start-stop time for the INVT Goodrive20-EU VFD Series is not explicitly mentioned in the provided context. However, the "Pre-exciting time" (P03.25) is listed as a parameter that helps improve torque performance during startup, with a setting range of 0.000 to 10.000 seconds. If more specific start-stop time details are needed, they may be found in additional documentation.
This answer is automatically generated