Table of Contents
Advertisement
Goodrive20-EU series VFD
Dimension drawings
Appendix B Dimension drawings
Dimension drawings of the Goodrive20-EU are shown below. The dimensions are given in
millimeters and inches.
B.1 External keypad structure
Figure B-1 Keypad dimensions
42.0
5.2
17.1
19.0
48.1 19.0
62.0
2-Ø4.5
16.0
8.0
26.0
Figure B-2 Dimensions of keypad installation without bracket
Note: The external keypad is optional for the VFDs (1PH 230V/3PH 400V ≤2.2kW and 3PH
230V ≤0.75kW); the standard keypad of VFDs (3PH 400V ≥4kW and 3PH 230V ≥1.5kW) can
be used as the external keypad.
The keypad can be installed on a bracket if it is used as an external one. Two kinds of
installation brackets are supported. The installation brackets are optional accessories. Figure
B-3 shows their outline and installation dimensions.
143
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Goodrive20-EU VFD Series and is the answer not in the manual?
Questions and answers
Start stop time
The start-stop time for the INVT Goodrive20-EU VFD Series is not explicitly mentioned in the provided context. However, the "Pre-exciting time" (P03.25) is listed as a parameter that helps improve torque performance during startup, with a setting range of 0.000 to 10.000 seconds. If more specific start-stop time details are needed, they may be found in additional documentation.
This answer is automatically generated