Table of Contents
Advertisement
Goodrive20-EU series VFD
Function
Name
code
Detailed instruction of parameters
FWD
K1
REV
K2
COM
2: 3-wire control 1; Sin is the enabling terminal in
this mode, and the running command is caused
by FWD and the direction is controlled by REV.
Sin is natural closed.
SB1
SB2
K
The direction control is as follows during
operation:
Sln
REV
OFF→ON
ON
ON→OFF
ON
ON→
ON
OFF
OFF
3: 3-wire control 2; Sin is the enabling terminal in
this mode, and the running command is caused
by SB1 or SB3 and both of them control the
running direction. NC SB2 generates the stop
command.
FWD REV
command
OFF
OFF
ON
OFF
OFF
ON
ON
ON
FWD
SIn
REV
COM
Previous
direction
Forward
Reverse
Reverse
Forward
Decelerate to stop
60
Function parameters
Default
value
Running
Stopping
Forward
running
Stopping
Reverse
running
Current
direction
Reverse
Forward
Forward
Reverse
Modify
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Goodrive20-EU VFD Series and is the answer not in the manual?
Questions and answers
Start stop time
The start-stop time for the INVT Goodrive20-EU VFD Series is not explicitly mentioned in the provided context. However, the "Pre-exciting time" (P03.25) is listed as a parameter that helps improve torque performance during startup, with a setting range of 0.000 to 10.000 seconds. If more specific start-stop time details are needed, they may be found in additional documentation.
This answer is automatically generated