Table of Contents
Advertisement
Goodrive20-EU series VFD
Function
Name
code
Braking current
P01.03
before starting
Braking time
P01.04
before starting
Detailed instruction of parameters
stand-by state. The starting frequency is not
limited in the lower limit frequency.
Output frequency
fmax
f1
t1
Setting range: 0.0 – 50.0s
The VFD will carry out DC braking at the braking
current set before starting and it will speed up
after the DC braking time. If the DC braking time
is set to 0, the DC braking is invalid.
The stronger the braking current, the bigger the
braking power. The DC braking current before
starting means the percentage of the rated
current of the VFD.
Setting range of P01.03: 0.0 – 100.0%
Setting range of P01.04: 0.00 – 50.00s
f1 set by P01.01
t1 set by P01.02
T
40
Function parameters
Default
Modify
value
◎
0.0%
◎
0.00s
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Goodrive20-EU VFD Series and is the answer not in the manual?
Questions and answers
Start stop time
The start-stop time for the INVT Goodrive20-EU VFD Series is not explicitly mentioned in the provided context. However, the "Pre-exciting time" (P03.25) is listed as a parameter that helps improve torque performance during startup, with a setting range of 0.000 to 10.000 seconds. If more specific start-stop time details are needed, they may be found in additional documentation.
This answer is automatically generated