Table of Contents
Advertisement
Goodrive20-EU series VFD
Function
Name
code
FDT1 electrical
P08.32
level detection
value
FDT1 retention
P08.33
detection value
FDT2 electrical
P08.34
level detection
value
FDT2 retention
P08.35
detection value
Amplitude
value for
P08.36
frequency
arrival
detection
Detailed instruction of parameters
When the output frequency exceeds the
corresponding frequency of FDT electrical level,
the multi-function digital output terminals will
output the signal of "frequency level detect FDT"
until the output frequency decreases to a value
lower than (FDT electrical level—FDT retention
detection value) the corresponding frequency,
the signal is invalid. Below is the waveform
diagram:
Output frequency
FDT level
Y,
RO1, RO2
Setting range of P08.32: 0.00Hz – P00.03
(the max. frequency)
Setting range of P08.33 and P08.35: 0.0 –
100.0%
Setting range of P08.34: 0.00Hz – P00.03
(the max. frequency)
When the output frequency is among the below
or above range of the set frequency, the
multi-function digital output terminal will output
the signal of "frequency arrival", see the diagram
below for detailed information:
FDT lag
78
Function parameters
Default
Modify
value
50.00H
○
z
○
5.0%
50.00H
○
z
○
5.0%
○
0.00Hz
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Goodrive20-EU VFD Series and is the answer not in the manual?
Questions and answers
Start stop time
The start-stop time for the INVT Goodrive20-EU VFD Series is not explicitly mentioned in the provided context. However, the "Pre-exciting time" (P03.25) is listed as a parameter that helps improve torque performance during startup, with a setting range of 0.000 to 10.000 seconds. If more specific start-stop time details are needed, they may be found in additional documentation.
This answer is automatically generated