Figure 40 Logical Libraries - Qualstar Q48 Installation And Operation Manual

Q24/Q48 Tape Library
4. Mailslot Enabled:
5. Auto Clean Enabled:
6. Select Language:
Changes will only be applied after the <Refresh> or the <Apply> button is selected. After doing so, a
warning page will inform the user of the impact of the proposed change. In some cases, a pop-up
screen will ask the operator to confirm the change. Many changes will also require a reboot.
The logical libraries drop down allows the user to partition one library into smaller "logical libraries".
3.2.7.2 Configuring Logical Libraries
Each logical library must contain at least one tape drive. For more information on this feature please
see Section 3.3, Partitioning the library.
© Copyright QUALSTAR 2015
Enabling the mail slot in the library reduces the total number of
available storage slots to the library's maximum slot count, less the
number of mailbox slots.
When auto clean is enabled, the library automatically loads a cleaning
cartridge when a tape drive needs to be cleaned. The library identifies a
tape as a cleaning tape if it has a bar code label that starting with CLN or
after an unlabeled cleaning tape has been loaded into the tape drive.
The select language menu allows the user to specify the language
displayed by the RMU interface. The default display language is English.
Possible alternate language selections are German, Italian, Spanish, and
French. In order for the selection to take affect the desired language
must be selected in the drop down menu and the apply button pushed.
The web screen must then be refreshed.
Figure 41 Logical Libraries
Installation and Operations Manual
46