Removing The Extraction Cone From The Ion Block - Waters Xevo TQD IVD Overview And Maintenance Manual

3. Use the combined 2.5-mm Allen wrench and cone extraction tool to unscrew the 4 captive
screws that secure the ion block assembly.
4. Remove the ion block assembly from the PEEK ion block support.
4.19.2

Removing the extraction cone from the ion block

4.19.2.1 Required materials
• Chemical-resistant, powder-free gloves
September 7, 2016, 715003560IVD Rev. C
Page 72
Screws securing the
Ion block
TP03130
PEEK ion block
support
Ion block assembly
TP03130