Solvents Used To Prepare Mobile Phases - Waters Xevo TQD IVD Overview And Maintenance Manual

Table C–1:
Item
Source enclosure view port
Trap bottle
Trap bottle push-in fittings
C.2

Solvents used to prepare mobile phases

These solvents are the most common ingredients used to prepare mobile phases for
reverse-phase LC/MS (API):
• Water
• Methanol
• Acetonitrile
• Formic acid (<0.1%)
• Acetic acid (<0.1%)
• Trifluoroacetic acid (<0.1%)
• Ammonium acetate (<10 mM)
• Ammonium formate (<10 mM)
These solvents are not expected to cause any problems with the materials identified in the table
above.
Items exposed to solvent (Continued)
September 7, 2016, 715003560IVD Rev. C
Material
Toughened plate glass
Polypropylene
Nitrile butadiene rubber, stainless steel,
polybutylene terephthalate, and
polyoxymethylene
Page 144