Basic Network Settings - Yealink SIP-T46G Manual
Gigabit color ip phone
Hide thumbs
Also See for SIP-T46G:
- Quick start manual ,
- Administrator's manual (434 pages) ,
- User manual (243 pages)
Table of Contents
Advertisement
Basic Network Settings
If your phone cannot contact a DHCP server for any reason, you need to configure a
static IP address manually.
To configure a static IP address via phone user interface:
1.
Press Menu->Setting->Advanced Settings (password: admin) ->Network->WAN
Port->Static IP Client.
2.
Enter the parameters: IP, subnet mask, default gateway, primary DNS, second DNS
in the corresponding fields.
3.
Press the Save soft key to accept the change or the Back soft key to cancel.
If you are using an xDSL modem, you can connect your phone to the Internet via PPPoE
mode. You can set a WAN port to be a PPPoE port. The PPPoE port will perform a PPP
negotiation to obtain the IP address. Contact your system administrator for the PPPoE
username and password.
To configure PPPoE via phone user interface:
1.
Press Menu->Setting->Advanced Settings (password: admin) ->Network->WAN
Port->PPPoE IP Client.
2.
Enter the username and password in the corresponding fields.
Getting Started
17
Advertisement
Table of Contents
