Configuring The Mss - Siemens Sirius 3RK3 System Manual

Getting Started

4.6 Configuring the MSS

4.6 Configuring the MSS
Configuration
Step Activity
1 Switch on your PC/PG. Install the MSS ES
software. Administrator rights are required
here.
Additional information: Description of the
software (Page 87)
2 Start the MSS ES software and choose
"Switching device" > "New..." >"Safety relays"
> "SIRIUS Modular Safety System 3RK3".
3 Connect the central unit to your
PC/programming device using the PC cable.
4 On the left of the navigation window, select
the "Identification" directory and then the
"Project" subdirectory.
5 Make entries in the following lines of the work
space:
Project name
•
Name of configuration engineer
•
Configuration engineer's company name
•
6 On the left of the navigation window, select
the "Configuration" directory and then the
"Main system" subdirectory.
7 Drag the 3RK3 Basic central unit from the
catalog window to the first green-illuminated
row in the work space for the hardware
configuration.
34
Result
The MSS ES software is installed on your computer.
The MSS ES software opens.
The MSS is connected to the PC/PG.
System Manual, 10/2008, 926 2530-02 DS 02
Modular Safety System 3RK3