Performing Initial Charging After Head Cleaning - MUTOH VJ-1938TX Operation Manual

Performing initial charging after head cleaning

[1]
Press!
[2]
Start Ink Charge
[3]
Wash retry?
Insert InkCartridges
Note
If you need to perform a head cleaning and [Wash retry? No] is displayed, press the [ - ] key to change the display to [Wash retry? Yes] and press the [Enter]
key. After that, follow the instructions displayed on the operation panel. When cleaning is complete, [Insert InkCartridges] is displayed. Proceed to step 4 in
this section.
[4]
3 sec.
3 sec.
[5]
Turn the power button of this product ON.
• Blue light becomes ON.
• The product starts initialization operations.
When the message to the left is displayed, press the [Enter] key.
-> Enter
Press the "Enter" key when the message on the left appears.
No
The message on the left will appear.
Make sure you shake the ink cartridge after you unpack it.
• Turn the ink plug upward and wait for 3 seconds.
• Next, turn the ink plug downward and wait for 3 seconds.
• Repeat that 3 times.
x 3
Install the ink pack and smart chip in the High-capacity pack adapter.
「Installing the ink pack and smart chip card」 P. 105

Performing initial charging after head cleaning

135