How To Carry Out Initial Ink Charging After Ink Discharge - MUTOH ValueJet VJ-1638UH Operation Manual

6 Maintenance
6.7.2

How to carry out initial ink charging after ink discharge

After transporting the printer, perform initial charge before printing. Because cleaning using the cleaning
liquid is not required, the procedure is partially different from
Follow the procedure below to perform initial ink charging at the time of recovery.
1. Turn the printer ON.
3.2.1 Turning the power ON
• The printer starts the initial operation.
• After the initial operation is complete, "Installed Wiper? No" is displayed on Operation panel.
2. Open Maintenance cover on the right side of the printer.
No.
1
336
Maintenance cover
VJ-1638UH OPERATION MANUAL
3.4 Initial ink charging
Name
1
6.7 Transporting the printer