Optional) Cabinet Assembly (Applicable Only To Downflow Units With Four Doors) - Huawei NetCol8000-C User Manual

NetCol8000-C(070-260) In-room Chilled Water Smart
Cooling Product
User Manual
Figure 3-14 Removing the bolts that secure the cabinet and the pallet
Step 3 (Only applicable to downflow units) Install the fan maintenance baffle plate at the front door.
Step 4 Close the front door and reinstall the rear door.
----End
3.4.4 (Optional) Cabinet Assembly (Applicable only to Downflow
Units with Four Doors)
Context



Procedure
Step 1 Remove the side protection cardboards and rear door panels of module 2 and module 3. Open
the front doors of module 2 and module 3, and remove the fan protective cover.
Issue 06 (2020-01-13)
For a single-door and double-door cabinet, remove the four bolts from both sides.
Operations should be conducted in a spacious and safe environment.
After the cables are connected, mark the terminals and bind them along the cabinet beam
using cable ties.
Ensure that nitrogen is completely exhausted from the exhaust valves of all modules.
Copyright © Huawei Technologies Co., Ltd.
3 Installation Guide
47