NetCol8000-C(070-260) In-room Chilled Water Smart
Cooling Product
User Manual
4.2 Power-On
Procedure
Step 1 Turn on the general switch, upstream switch, (optional) electric heater switch QF3, and fan
switch QF4. For a device that has two power inputs, turn on the active power switch QF1 and
standby power switch QF2.
Step 2 After the system is powered on for the first time, the Quick Settings screen is displayed. Log
in as the admin user, as shown in
Figure 4-1 Initial power-on
Table 4-1 Preset password
User
admin (administrator
user)
operator (common
user)
Issue 06 (2020-01-13)
Figure
Preset Password
000001
000001
Copyright © Huawei Technologies Co., Ltd.
4-1.
Permission Description
People can operate all menus.
People can only view parameter settings
and set a part of parameters in the
menus.
4 Commissioning
122