Table of Contents
Advertisement
NetCol8000-C(070-260) In-room Chilled Water Smart
Cooling Product
User Manual
Figure 6-25 Removing a connection box cover
Step 6 Open the connection box. Hold the area marked by gray in the following figure using a small
flat-head screwdriver, remove the signal cable and power cable shown in the following figure,
and then remove the screw in the area marked by yellow (namely, the PE cable) using a
flat-head screwdriver.
Figure 6-26 Cable connections
Issue 06 (2020-01-13)
Copyright © Huawei Technologies Co., Ltd.
6 System Operation and Maintenance
261
Advertisement
Table of Contents
