Table of Contents
Advertisement
NetCol8000-C(070-260) In-room Chilled Water Smart
Cooling Product
User Manual
When removing the fan support beam, assign one person to hold the fan.
Step 3 Unscrew the fan support beam from the fan and the cabinet using a 13# socket wrench.
Figure 3-26 Removing the fan support beam
Step 4 Turn the fan to 45 degrees to the cabinet bottom, push the fan along the guide rails at both
sides, and press down the fan until it is level.
Issue 06 (2020-01-13)
Copyright © Huawei Technologies Co., Ltd.
3 Installation Guide
57
Advertisement
Table of Contents
