Huawei NetCol8000-C User Manual page 256

NetCol8000-C(070-260) In-room Chilled Water Smart
Cooling Product
User Manual
2.
3.
Step 5 Install a new water valve actuator.
1.
The T port of the water valve body faces left, and the connecting plate is fitted in with the
screws on the left. The handle is kept upwards.
2.
Issue 06 (2020-01-13)
Insert the hex key on the handle into the hole in the front of the actuator, as shown by (2)
in Figure 6-9.
Turn the handle in the direction shown by (3) in
remove the actuator.
(Optional) Use an actuator handle to remove the locating pin from the hole in the new
actuator mounting kit, as shown in
Figure 6-10 Removing a locating pin
Rotate the T port of the water valve body to the left, as shown by (1) in
in the connecting plate with the screws on the left, as shown by (3) in
the handle upwards, as shown by (4) in
Copyright © Huawei Technologies Co., Ltd.
6 System Operation and Maintenance
Figure 6-9
Figure 6-10.
Figure 6-11.
to loosen the screw and
Figure 6-11. Fit
Figure 6-11. Keep
248