Table of Contents
Advertisement
Chapter 5
This chapter explains the basic maintenance (i.e. cleaning the cutting plotter)
required for the cutting plotter. Except for the below mentioned, all other
maintenance must be performed by a qualified service technician.
5.1
Cleaning the Cutting Plotter
In order to keep the cutting plotter under good condition and best performance,
you need to clean the machine properly and regularly.
Precaution in Cleaning
Recommended Methods
Gently wipe the cutting plotter surface with a lint-free cloth. If necessary,
clean with a damp cloth or an alcohol-immersed cloth. Wipe with water to
rinse off any residue and dry with a soft, lint-free cloth.
Wipe all dust and dirt from the tool carriage rails.
Use a vacuum cleaner to empty any accumulated dirt and media residue
beneath the pinch roller housing.
Clean the platen, paper sensors and pinch rollers with a damp cloth or an
alcohol-immersed cloth, and dry with a soft, lint-free cloth.
Wipe dust and dirt from the stand.
Basic Maintenance
B
a
s
i
c
M
a
i
n
B
a
s
i
c
M
a
i
n
B
a
s
i
c
M
a
i
n
Unplug the cutting plotter before cleaning
Never use
detergents
for cleaning. They may damage the surface of
the cutting plotter and the moving parts.
t
e
n
a
n
c
e
t
e
n
a
n
c
e
t
e
n
a
n
c
e
solvents, abrasive cleaners or strong
5-1
Expert Pro User Manual
- Quick Links:
- Blade Installation
Hide quick links:
Advertisement
Table of Contents
