8-42 CHASSIS
REAR BRAKE PEDAL REMOVAL
• Remove the brake adjuster nut 1, pin 2, spring 3 and
washer 4.
NOTE:
When removing the brake rod, depressing the brake pedal.
• Remove the rear brake light switch spring 5.
• Remove the cotter pin 6 and washer 7.
Never reuse a cotter pin.
• Remove the brake pedal return spring 8.
• Remove the brake pedal 9 along with brake rod.
REAR BRAKE PEDAL INSTALLATION
Install the rear brake pedal in the reverse order of removal. Pay
attention to the following points:
• Apply grease to the brake pedal shaft.
99000-25160: SUZUKI WATER RESISTANCE GREASE
• After assembling, check the brake for operating condition,
play and braking effect.
• Check the brake lamp lighting timing.
or equivalent