Suzuki TU250X Service Manual page 225

• Loosen the front axle pinch bolt 2.
• Loosen the front axle 3 with the special tool.
 09900-18710: Hexagon socket (12 mm)
• Raise the front wheel off the ground and support the motorcy-
cle with a jack or a wooden block.

* Do not support the motorcycle with the exhaust
pipes.
* Make sure that the motorcycle is supported securely.
• Remove the front wheel 4 by removing the front axle 3.

Do not operate the brake lever while front wheel is
removed.
• Remove the collar 5 and speedometer gearbox 6.
• Remove the brake disc 7 by removing its bolts.
CHASSIS 8-5