Suzuki TU250X Service Manual page 99

3-52 ENGINE
• Install a new oil seal 3 with the special tool.
Oil seal 3: 68 Attachment

Align the oil hole of crankcase with the concave part of
oil seal 3.
 09913-70210: Bearing installer set (10 – 75 )
• Install the washer 4.
NOTE:
The convex curve side of washer 4 faces outside.
• Install a new bearing 5 with the special tool.
Bearing 5: 75 Attachment
 09913-70210: Bearing installer set (10 – 75 )
• Install new bearings (6, 7) with the special tool.
Bearing 6: 40 Attachment
Bearing 7: 62 Attachment
 09913-70210: Bearing installer set (10 – 75 )
NOTE:
The sealed side of bearing 6 faces outside.