Suzuki TU250X Service Manual page 217

• Install the muffler connector 2.

Replace the muffler connector with a new one.
NOTE:
The chamfer side A faces backward.
• Tighten the muffler connecting bolt 3 to the specified torque.
 Muffler connecting bolt: 23 N·m (2.3 kgf-m, 16.5 lbf-ft)
• Install the exhaust pipe cover 4.
• Tighten the exhaust pipe cover screw 5 to the specified
torque.
NOTE:
The tip B of clamp should face inside of the exhaust pipe cover.
 Exhaust pipe cover screw: 4 N·m (0.4 kgf-m, 3.0 lbf-ft)
• Install the exhaust pipe gasket 6.

Replace the exhaust pipe gasket with a new one.
NOTE:
Be sure to face the tabs c on the exhaust pipe gasket to the
engine side when installing it.
EXHAUST SYSTEM 6-5
20 – 30˚