Suzuki TU250X Service Manual page 56

NOTE:
* Pass the PAIR pipe 1 between the engine mounting upper
plats.
* Fit the clamp 2 to the bolt.
* Fit the guide 3 to the bolt.
• Connect the engine ground wire 4.
NOTE:
Fit the engine ground wire 4 and clamp 5 to the crankcase
bolt.
 Crankcase bolt: 11 N·m (1.1 kgf-m, 8.0 lbf-ft)
• Install the engine sprocket.
NOTE:
The convex part side A of engine sprocket faces outside.
• Tighten the engine sprocket nut to the specified torque.
NOTE:
When tightening the engine sprocket nut, depress the rear brake
pedal.
 Engine sprocket nut: 90 N·m (9.0 kgf-m, 65.0 lbf-ft)
• Bend a new lock washer securely.
ENGINE 3-9