Suzuki TU250X Service Manual page 97

3-50 ENGINE
BEARING AND OIL SEAL REMOVAL

The removed bearings and oil seals must be replaced
with new ones.
Right crankcase
• Remove the bearing retainer 1.
• Remove the bearings (2, 3, 4, 5) with the special tool.
Bearing 2: 47 Attachment
Bearing 3: 40 Attachment
Bearing 4: 35 Attachment
Bearing 5: 30 Attachment
 09913-70210: Bearing installer set (10 – 75 )
Left crankcase
• Remove the oil seals (1, 2, 3) with the special tool.
 09913-50121: Oil seal remover
• Remove the bearings (4, 5, 6) with the special tool.
Bearing 4: 35 mm Remover
Bearing 5: 17 mm Remover
Bearing 6: 25 mm Remover
 09921-20240: Bearing remover set
• Remove the washer 7.