Balancer Driven Gear - Suzuki TU250X Service Manual

DISASSEMBLY
• Remove the starter driven gear.
• Remove the rollers 1, push pieces 2 and springs 3.
• Hold the generator rotor with the special tool and remove the
starter clutch bolts.
 09930-44521: Rotor holder
• Remove the starter clutch body 4.
REASSEMBLY
• Apply a small quantity of thread lock to the starter clutch bolts
and tighten them to the specified torque while holding the spe-
cial tool.
 99000-32030: THREAD LOCK SUPER "1303"
 Starter clutch bolt: 26 N·m (2.6 kgf-m, 19.0 lbf-ft)
 09930-44521: Rotor holder

BALANCER DRIVEN GEAR

DISASSEMBLY
• Remove the inner race 1, springs 2 and pins 3.

* Do not drop the springs 2, when removing the inner
race.
* Note the location of the pins 3.
REASSEMBLY
• Install the springs 2 and pins 3 onto the inner race 1.
or equivalent
ENGINE 3-41