Suzuki TU250X Service Manual page 161

4-40 FI SYSTEM DIAGNOSIS
TP LEARNED VALUE RESET
When replacing the throttle body assembly or TP sensor with a
new one or reinstalling the TP sensor, reset the TP learned
value in the following procedures:
1) Turn the ignition switch ON.
2) Set up the SDS tool. (Refer to the SDS operation manual for
further details.)
3) Click the "Active control".
4) Click the "TP learned value reset" 1.
5) Click the "Reset" button 2 to clear the TP learned value.
NOTE:
The leaned value of the TP sensor is set at Preset position.
6) Close the SDS tool and turn the ignition switch OFF.