Suzuki TU250X Service Manual page 66

• Remove the pin 6 and washer 7.
• Remove the oil pump 8.

Do not attempt to disassemble the oil pump assembly.
GEARSHIFT
• Remove the gearshift shaft 1.
• Remove the cam guide 2 and pawl lifter 3.
• Remove the gearshift cam driven gear 4.
NOTE:
When removing the gearshift cam driven gear 4, do not lose the
pawls 5, pins 6 and springs 7.
• Remove the gearshift arm stopper 8.
PRIMARY DRIVE GEAR
• Hold the generator rotor with the special tool and remove the
crank balancer bolt 1.
 09930-44521: Rotor holder
• Remove the washer 2.
ENGINE 3-19