REASSEMBLY
Reassemble the cylinder head in the reverse order of disassem-
bly. Pay attention to the following points:
• Install each valve spring seat 1.
• Apply molybdenum oil solution to the valve stem seal 2, and
press-fit it into position.
Do not reuse the removed valve stem seal.
MOLYBDENUM OIL SOLUTION
• Insert the valve, with its stem coated with molybdenum oil
solution all around and along the full stem length without any
break.
When inserting the valve, take care not to damage the
lip of valve stem seal.
MOLYBDENUM OIL SOLUTION
• Install the valve spring with the small-pitch portion A facing
cylinder head.
B Large-pitch portion
C UPWARD
ENGINE 3-33