Suzuki TU250X Service Manual page 119

3-72 ENGINE
CYLINDER HEAD COVER
• Clean and degrease the mating surfaces of the cylinder head
and cylinder head cover.
• Install the dowel pins and cylinder head plug 1.
• Apply bond to the cylinder head cover and part A of the cylin-
der head.
 99000-31110: SUZUKI BOND "1215" or equivalent

* Coat the sealant evenly without break.
* Application of sealant must be performed within a
short period of time.
* Take extreme care not to let sealant enter into the oil
hole or bearing.
• Install the cylinder head cover.
• Lightly tighten the cylinder head cover bolts and nuts diago-
nally, and then tighten them to the specified torque.

Fit new gasket to the bolt 2.
 Cylinder head cover bolt/nut:
11 N·m (1.1 kgf-m, 8.0 lbf-ft)