Drive Chain - Suzuki TU250X Service Manual

• Apply engine oil to new O-rings (4, 5).
• Install a new oil filter.
• Install the spring 2 correctly.
• Install the oil filter cap and tighten the nuts securely.
• Add new engine oil and check the oil level as described in the
engine oil replacement procedure.
 Engine oil capacity
Oil change: 1 400 ml (1.5 US qt)
Oil and filter change: 1 500 ml L (1.6 US qt)
Engine overhaul: 1 900 ml (2.0 US qt)

Make sure that the oil filter is installed properly. If the
filter is installed improperly, serious engine damage
may result.
OIL STRAINER CLEANING
(3-43)

DRIVE CHAIN

Inspect initially at 1 000 km (600 miles, 3 months) and
every 5 000 km (3 000 miles, 15 months) thereafter.
Clean and lubricate every 1 000 km (600 miles).
Visually inspect the drive chain for the possible defects listed
below.
* Loose pins
* Damaged rollers
* Dry or rusted links
* Missing O-ring seals
If any defects are found, the drive chain must be replaced.
(8-54)
NOTE:
When replacing the drive chain, replace the drive chain and
sprockets as a set.
* Improper chain adjustment
* Excessive wear
* Kinked or binding links
PERIODIC MAINTENANCE 2-11
Pin
O-ring seal
Roller