Suzuki TU250X Service Manual page 98

• Remove the oil seal 8 with the special tool.
Oil seal 8: 62 Attachment
 09913-70210: Bearing installer set (10 – 75 )
• Remove the bearing 9 with the special tool.
Bearing 9: 35 Attachment
 09913-70210: Bearing installer set (10 – 75 )
• Remove the washer 0.
BEARING AND OIL SEAL INSTALLATION
Right crankcase
• Install new bearings (1, 2, 3, 4) with the special tool.
Bearing 1: 72 Attachment
Bearing 2: 62 Attachment
Bearing 3: 55 Attachment
Bearing 4: 40 Attachment
 09913-70210: Bearing installer set (10 – 75 )
• Install the bearing retainer 5.
• Apply a small quantity of thread lock to the bearing retainer
screws and tighten them.
 99000-32110: THREAD LOCK SUPER "1322"
Left crankcase
• Install the washer 1.
• Install a new bearing 2 with the special tool.
Bearing 2: 55 Attachment
 09913-70210: Bearing installer set (10 – 75 )
or equivalent
ENGINE 3-51