Suzuki TU250X Service Manual page 272

8-52 CHASSIS
DUST SEAL
• Install a new dust seal with the special tool.
 09913-70210: Bearing installer set (10 – 75)
• Apply grease to the dust seal lip.
 99000-25010: SUZUKI SUPER GREASE "A"
REAR SPROCKET MOUNTING DRUM
• Apply grease to the contacting surface between the sprocket
mounting drum and rear wheel hub.
 99000-25010: SUZUKI SUPER GREASE "A"
REAR WHEEL
• Adjust the drive chain slack after installing the rear wheel.
(2-13)
• Temporary tighten the rear axel nut 1.
• Tighten the rear axle nut 1 and torque link nut (rear) 2 to the
specified torque.
 Rear axle nut: 65 N·m (6.5 kgf-m, 47.0 lbf-ft)
Torque link nut: 16 N·m (1.6 kgf-m, 11.5 lbf-ft)
• Tighten both chain adjuster lock-nuts 3 securely.
• Check the rear brake pedal free travel. (2-17)
or equivalent
or equivalent