Suzuki TU250X Service Manual page 104

• Align the pin groove A of gearshift cam stopper plate 1 with
the pin B on gearshift cam.
• Install the gearshift cam stopper 2.
• Install the gearshift forks and gearshift cam 6.
3: Gearshift fork No.1
4: Gearshift fork No.2
5: Gearshift fork No.3
• Install the gearshift fork shafts (7, 8).
NOTE:
Three kinds of gearshift forks (3, 4, 5) are used. They resem-
ble each other very closely in external appearance and configu-
ration. Carefully examine the photograph for correct installing
positions and directions.
• Install the gearshift cam stopper spring 9 as shown.
CRANK BALANCER
• Install the crank balancer shaft 1 and key 2.
ENGINE 3-57