Suzuki TU250X Service Manual page 69

3-22 ENGINE
• Remove the crankcase bolts, left and right.
• Separate the left and right crankcases with the special tool.
 09920-13120: Crankcase remover
NOTE:
* Fit the crankcase separator, so that the tool arms are in paral-
lel with the side of crankcase.
* The crankshaft and transmission components should remain
in the left crankcase half.
* When separating the crankcase, tap the end of the
countershaft with a plastic mallet.
• Remove the O-rings (1, 2) and dowel pins.
CRANK BALANCER
• Remove the shim 1, washers 2 and crank balancer driven
gear 3.