Use Of Sds Diagnostic Procedures - Suzuki TU250X Service Manual

USE OF SDS DIAGNOSTIC PROCEDURES

* Do not disconnect the couplers from ECM, battery cable from
battery, ECM ground wire from the engine or main fuse before
confirming the DTC (Diagnostic Trouble Code) stored in mem-
ory. Such disconnection may erase the memorized information
in ECM memory.
* DTC stored in ECM memory can be checked by SDS.
* Be sure to read "PRECAUTIONS IN SERVICING" (4-3)
before inspection and observe what is written there.
• Remove the front right frame cover. (8-3)
• Set up the SDS tool. (Refer to the SDS operation manual for
further details.)
• Read the DTC (Diagnostic Trouble Code) and show data
when trouble (displaying data at the time of DTC) according to
instructions displayed on SDS.
• SDS is not only used for detecting DTC but also for reproduc-
ing and checking on screen the failure condition as described
by customers using the trigger.
• How to use trigger, refer to the SDS operation manual for fur-
ther details.
 09904-41010: SUZUKI Diagnostic system set
99565-01010-020: CD-ROM Ver.20
FI SYSTEM DIAGNOSIS 4-23