Suzuki TU250X Service Manual page 215

• Remove the exhaust pipe/muffler 5 by removing the mount-
ing bolt and nut.
NOTE:
Support the muffler to prevent it from falling.
• Remove the exhaust pipe gasket 6.
• Remove the exhaust pipe cover 7.
• Loosen the muffler connecting bolt 8.
• Remove the exhaust pipe 0 from the muffler 9.
• Remove the HO2 sensor A.

* Be careful not to expose the HO2 sensor to exces-
sive shock.
* Do not use an impact wrench while removing or
installing the HO2 sensor.
* Be careful not to twist or damage the HO2 sensor
lead wire.
EXHAUST SYSTEM 6-3