Switch; Ignition Switch Removal; Ignition Switch Installation - Suzuki TU250X Service Manual

SWITCH

IGNITION SWITCH REMOVAL

• Remove the headlight. (9-30)
• Disconnect the ignition switch lead wire couplers 1.
• Remove the ignition switch mounting bolts using the special
tools.
 09930-11920: Torx bit (JT40H)
09930-11940: Torx bit holder
• Remove the ignition switch 2.

IGNITION SWITCH INSTALLATION

Install the ignition switch in the reverse order of removal. Pay
attention to the following points:
• Apply thread lock to the ignition switch mounting bolts.

When reusing the ignition switch mounting bolts,
clean threaded part and apply the thread lock to them.
 99000-32110: THREAD LOCK SUPER "1322"
• Tighten the ignition switch mounting bolts using the special
tools.
 09930-11920: Torx bit (JT40H)
09930-11940: Torx bit holder
or equivalent
ELECTRICAL SYSTEM 9-35