Suzuki TU250X Service Manual page 61

3-14 ENGINE
CYLINDER HEAD/CAM CHAIN GUIDE
• Remove the cylinder head nuts diagonally.
• Remove the cylinder head 1.
NOTE:
If the cylinder head does not come off easily, lightly tap it using a
plastic hammer.
• Remove the dowel pins and gasket 2.
• Remove the cam chain guide 3.
CYLINDER
• Remove the cylinder 1.
NOTE:
If the cylinder does not come off easily, lightly tap it using a plas-
tic hammer.
• Remove the dowel pins and gasket 2.
PISTON
• Place a clean rag over the cylinder base to prevent the piston
pin circlip 1 from dropping into the crankcase. Then, remove
the piston pin circlip 1.