Connection Details" Dialog Box With Direct Connection Parameters; Modbus Holding Registers - Phoenix Contact Nanoline Series User Manual

2338_en_O
Configuration: Connection - Connect with Modbus RTU
1. Click the "Connection... Connect..." menu.
2. From the "Connect Using:" drop-down menu, select "Direct Connection to COMx"
where x is the selected COM port.
Figure 3-5

"Connection Details" dialog box with direct connection parameters

3. The default settings that appear should be correct for the COM port selected (see
Figure 3-5).
4. Click the "Protocol Selections" button and enter "1 ms" in the "Delay Between Polls"
field.
5. Click the "OK" button.
ModScan32 running
Modbus Holding Registers are shown in the status window. Use the Modbus Holding
Registers chart (see "Modbus
meaning of these registers.
®
holding registers" on page 83) to determine the value and
Communication
43
PHOENIX CONTACT