Setup; Figure 5-40 Setup Menu; Figure 5-41 Setup Screen; Figure 5-42 System Information Screen - Phoenix Contact Nanoline Series User Manual

Nanoline
80
PHOENIX CONTACT
5.6.5

Setup

The Setup screens provide information on operating parameters. The available parameters
are dependent upon which modules are installed. For instance, the time and date are only
available when the RTC option module is installed.
When a project is loaded, the System menu status field displays the part number of the base
unit, i.e., PN 2701027. If no project is loaded, the status fields are blank.
From the System menu, press the <4> key to access setup parameters.
Figure 5-40 Setup menu
Figure 5-41 Setup screen
5.6.5.1 System information
From the Setup screen, press the <0> key to access the system information for the Nanoline
components installed.
Figure 5-42 System information screen
The first line lists the firmware installed in the base unit.
For information on updating the firmware, refer to the nanoNavigator User Manual.
The second and third lines list the type and quantity of digital channels on the base unit.
The fourth line is a header for I/O expansion modules installed.
Beginning on the fifth line are the type and quantity of digital channels on each I/O
expansion module. A line only appears when a module is connected.
2338_en_O