Memory Module Menu With Project Running; Memory Module Menu With Project Stopped - Phoenix Contact Nanoline Series User Manual

Nanoline
82
PHOENIX CONTACT
– Upload the control project to the memory module
– Download the control project to the Nanoline
– Clear (delete) the program stored in the memory module
Figure 5-46

Memory Module menu with project running

From the Memory Module menu, press the corresponding key for the desired function.
The transfer or clearing of data to or from the module occurs very quickly. Although the
transfer process is indicated by the LED on the module flashing, it rarely flashes more than
once.
If the project is running, option 1 is not available until the project is stopped.
Figure 5-47

Memory Module menu with project stopped

For more information on how the optional memory module works, refer to "Memory Module"
on page 37.
2338_en_O