Special Key Combinations; Monitor Mode - Phoenix Contact Nanoline Series User Manual

Nanoline
64
PHOENIX CONTACT
5.2.1

Special key combinations

<Shift> + <OK>
When in Run mode, pressing the <Shift> and <OK> keys together places the controller in
Monitor mode and displays the System menu.
SHIFT 5 6
0
<Shift> key
Figure 5-1 <Shift> and <OK> keys
<Shift> + 
When in the Monitor mode, pressing the <Shift> and  keys together returns the user to the
previous menu. Continuous pressing of these keys will eventually return the user to the
control application screen or main selection screen, if a user-defined screen is not
configured.
Not all screens display "SF " at the bottom of the screen. However, pressing the <Shift>
and  keys always displays the previous menu, even when not displayed at the bottom.
SHIFT 5 6
0
<Shift> key
<Shift> and  keys
Figure 5-2
OK
7 8 9
1 2 3 4
OK
7 8 9
1 2 3 4
<OK> key
 key
2338_en_O