Figure 5-27 Timer/Counter List; Figure 5-28 Timer/Counter Modification Options; Figure 5-29 Entering A Timer/Counter Preset Value - Phoenix Contact Nanoline Series User Manual

2338_en_O
5.6.1.4 Timers and counters
From the "Monitor Data Items" menu, select 3 to display all the timers available in the
Nanoline and the status of each one.
Figure 5-27 Timer/counter list
A list of timer/counters appears. Use the  or  key to scroll through the list.
– The first column shows the number of each timer/counter. Each timer/counter uses two
rows to display the information.
– The "r" indication means the timer/counter is retentive (saved when power to the
Nanoline is removed).
– The second column indicates the row is displaying a current (C) value or a preset (P)
value.
– The third column indicates the value of either the current or preset value.
Two options are available for modifying a Timer/Counter.
Modifying the preset value – Use the  or  key to highlight the desired timer/counter.
Press the <OK> key to display the available options.
Figure 5-28 Timer/counter modification options
Press the <3> key to access the preset value modification field.
Use the  or  key to highlight the desired timer/counter, and then press the <OK> key.
Figure 5-29 Entering a timer/counter preset value
The format of the timer/counter value defaults to the value previously selected in
nanoNavigator. The format possibilities are:
Counter xxxxxx
HH:MM:SS xx:xx:xx
Seconds x.xxx
Operator Panel usage
75
PHOENIX CONTACT