Receptor Panel, Display Cable And Remote Operator Panel - Phoenix Contact Nanoline Series User Manual

Nanoline
20
PHOENIX CONTACT
The remote Operator Panel can be mounted in enclosures with a thickness of 1.6 - 2.0 mm.
When mounted remotely, the Operator Panel must be within 0.6 m of the base unit for
proper communication.
NOTE:
To ensure proper power supply and communication with the Operator Panel, only use a
display cable supplied by Phoenix Contact.
NLC-OP1-LCD-032-4X20
Figure 2-11

Receptor Panel, display cable and remote Operator Panel

Operator
Panel
Base unit
Receptor
Panel
Display
cable
2338_en_O