2338_en_O
5.6.3
Password
To prevent changes to the System menu, a password can be configured for the control
program. Password configuration can only be configured using nanoNavigator, the
programming software. Refer to the "nanoNavigator User Manual" or Help system for
additional information.
If a password is not configured, changes to the System menu are always possible when
pressing the <Shift> and <OK> keys. From the System menu, the status of the password is
displayed as "Not Set."
Figure 5-38
Password Not Set
If a password is configured, the System menus can be viewed by pressing the <Shift> and
<OK> keys. However, parameters cannot be modified.
5.6.4
Project name
The System menu displays the project name as configured by the programmer in
nanoNavigator. The project name can have up to 256 characters but only the first 12
characters are displayed on the Operator Panel.
Figure 5-39
Project name
The Nanoline stores one project at a time. For information on downloading and uploading
projects, refer to "Communication" on page 35.
Operator Panel usage
79
PHOENIX CONTACT