Operator Panel; Nlc-Op1-Lcd-032-4X20; Nanoline Operator Panel (Nlc-Op1-Lcd-032-4X20); Data Entry - Phoenix Contact Nanoline Series User Manual

Nanoline
8
PHOENIX CONTACT
Blanks are used to fill the slot when a module is not used. If a base unit option module is
removed, place the blank in the slot to prevent ingress of dirt and dust.
1.2

Operator Panel

To provide an interface to the control system, an Operator Panel (NLC-OP...) can be
installed in, or attached to, the base unit. Two different sizes of Operating Panel are
available:
1.2.1

NLC-OP1-LCD-032-4X20

The NLC-OP1-LCD-032-4X20 can be mounted directly on the base unit or remotely, such
as in an enclosure door panel. When mounting remotely, a Receptor Panel is placed in the
slot on the base unit, and a 1 m (3 ft.) cable connects the Receptor Panel and the remotely
mounted Operator Panel. In this way, a single NLC-OP-... can be shared between multiple
base units. The Operator Panel is hot-swappable and doesn't require rebooting the
controller.
LCD
Shift key
SHIFT
Figure 1-4

Nanoline Operator Panel (NLC-OP1-LCD-032-4X20)

The Nanoline Operator Panel includes an 8-line, 21-character Liquid Crystal Display (LCD),
four navigation keys, an <OK> or select key, a <shift> key and five data entry keys.
User-programmed screens are limited to 4 lines with 20 characters (normal text), 2 lines
with 10 characters (large text) or a combination of normal and large text.
When a user interface is created within nanoNavigator, the navigational keys allow
selection of the various screens and fields within the screens.
– Navigational keys: These allow selection of various screens and fields, or lines, on the
LCD.
– Select <OK> key: This selects an option within the screen, allowing selection of another
level of screen navigation. This is also used to enter the "edit" mode of a field for data
entry.
– Data entry key: These five keys allow entry of numeric values (0 through 4) into a field.
The data entry keys can be programmed as digital inputs to allow selection within the
software.
– Shift key: This works in conjunction with the data entry keys to obtain values 5 through
9. Press and hold the Shift key while pressing a 0 to 4 key enters the comparable 5 to 9
value.
OK
5 6 7 8
0 1 2 3
Select (OK) key
Navigational keys
Data entry keys
9
4
2338_en_O